• HUATEC GROUP CORPORATION
    Bob
    Tipo di pollice di Astm E114-15 acciaio al carbonio 1018 del blocchetto della prova di verifica Mini Iiw 2
  • HUATEC GROUP CORPORATION
    William
    Tipo di pollice di Astm E114-15 acciaio al carbonio 1018 del blocchetto della prova di verifica Mini Iiw 2
  • HUATEC GROUP CORPORATION
    Tom
    Tipo di pollice di Astm E114-15 acciaio al carbonio 1018 del blocchetto della prova di verifica Mini Iiw 2
  • HUATEC GROUP CORPORATION
    Leo
    Tipo di pollice di Astm E114-15 acciaio al carbonio 1018 del blocchetto della prova di verifica Mini Iiw 2
Persona di contatto : Noah
Numero di telefono : +8613911115555
WhatsApp : +8613910983110

Dual Element Phased Array Probes For Ultrasonic Inspection Equipment ISO CE

Luogo di origine Pechino
Marca HUATEC
Certificazione ISO, CE, GOST
Numero di modello HFD UL
Quantità di ordine minimo 1pc
Imballaggi particolari Pacchetto standard di esportazione
Tempi di consegna 1-4days
Termini di pagamento T/T, PayPal, Western Union
Capacità di alimentazione 5000 PCS al mese

Contattatemi per campioni e buoni.

WhatsApp:0086 18588475571

WeChat: 0086 18588475571

Skype: sales10@aixton.com

Se avete qualche problema, offriamo assistenza online 24 ore su 24.

x
Dettagli
Intervallo di frequenza 12da.5 kHz a 10 MHz Trasduttore di contatto dimensioni degli elementi diversi
Trasduttore facciale protetto con pellicola o scarpe Trasduttore a doppio elemento Elemento doppio
Cuneo contornato AID CID AOD COD Materiale Plastico, alluminio, lega
Evidenziare

ultrasonic flaw detectors

,

ultrasonic flaw detection

,

digital ultrasonic flaw detector

Lasciate un messaggio
Descrizione di prodotto

 

Ultrasonic ndt equipment Ultrasonic Inspection Equipment Probe Transducer Phased Array Prob

 

1. Straight probe: single crystal p-wave straight probe double crystal p-wave straight probe

 

2. The Angle probe: single crystal shear Angle probe a1 < aL < a Ⅱ, twin shear Angle probe

 

Single-crystal p-wave oblique probe aL

AL is a climbing wave probe near a1. The longitudinal wave transmitted along the surface of the workpiece has the advantages of fast speed, high energy, long wavelength, deeper detection depth than the surface wave, and the requirement for the surface finish of the workpiece is higher than that of the surface wave (frequency 2.5mhz wavelength about 2.4mm).

 

3. Probe with curvature: circumferential curvature, radial curvature.

 

The circumferential curvature probe is suitable for the detection of axial defects in seamless steel tubes, straight welded tubes, tubular forgings and axial workpieces. When the diameter of the workpiece is less than 2000mm, the circumferential curvature of the probe shall be ground to ensure good coupling.

 

Radial curvature probe is suitable for the detection of radial defects in seamless steel pipe, butt weld of steel pipe, barrel forging, shaft workpiece, etc. When the workpiece diameter is less than 600mm, the radial curvature of the probe should be ground to ensure good coupling.

 

4. Focusing probe: point focusing line focusing.

 

5. Surface wave probe :(when the incident Angle of the longitudinal wave is greater than or equal to the second critical Angle, the transverse wave refraction Angle is equal to 90 to form a surface wave).

 

The transverse wave transmitted along the workpiece surface has a slow speed, low energy and short wavelength, and the detection depth is shallower than the crawling wave. Therefore, the requirements for the surface finish of the workpiece are stricter than the crawling wave.

 

Surface wave detection can only detect defects at a depth of two wavelengths from the surface of the workpiece. (frequency 2.5mhz wavelength about 1.3mm).

Dual Element Phased Array Probes For Ultrasonic Inspection Equipment ISO CE 0

Dual Element Phased Array Probes For Ultrasonic Inspection Equipment ISO CE 1

 

Dual Element Phased Array Probes For Ultrasonic Inspection Equipment ISO CE 2

Dual Element Phased Array Probes For Ultrasonic Inspection Equipment ISO CE 3

Dual Element Phased Array Probes For Ultrasonic Inspection Equipment ISO CE 4

Dual Element Phased Array Probes For Ultrasonic Inspection Equipment ISO CE 5

Dual Element Phased Array Probes For Ultrasonic Inspection Equipment ISO CE 6

Dual Element Phased Array Probes For Ultrasonic Inspection Equipment ISO CE 7

Dual Element Phased Array Probes For Ultrasonic Inspection Equipment ISO CE 8

Dual Element Phased Array Probes For Ultrasonic Inspection Equipment ISO CE 9Dual Element Phased Array Probes For Ultrasonic Inspection Equipment ISO CE 10

Dual Element Phased Array Probes For Ultrasonic Inspection Equipment ISO CE 11

Dual Element Phased Array Probes For Ultrasonic Inspection Equipment ISO CE 12

Dual Element Phased Array Probes For Ultrasonic Inspection Equipment ISO CE 13

Dual Element Phased Array Probes For Ultrasonic Inspection Equipment ISO CE 14

Dual Element Phased Array Probes For Ultrasonic Inspection Equipment ISO CE 15