Tutti i prodotti
  • HUATEC GROUP CORPORATION
    Bob
    Tipo di pollice di Astm E114-15 acciaio al carbonio 1018 del blocchetto della prova di verifica Mini Iiw 2
  • HUATEC GROUP CORPORATION
    William
    Tipo di pollice di Astm E114-15 acciaio al carbonio 1018 del blocchetto della prova di verifica Mini Iiw 2
  • HUATEC GROUP CORPORATION
    Tom
    Tipo di pollice di Astm E114-15 acciaio al carbonio 1018 del blocchetto della prova di verifica Mini Iiw 2
  • HUATEC GROUP CORPORATION
    Leo
    Tipo di pollice di Astm E114-15 acciaio al carbonio 1018 del blocchetto della prova di verifica Mini Iiw 2
Persona di contatto : Noah
Numero di telefono : +8613911115555
WhatsApp : +8613910983110

Ac Dc Surface And Near Surface Cracks Magnetic Particle Test Equipment

  • Ac Dc Surface And Near Surface Cracks Magnetic Particle Test Equipment
  • Ac Dc Surface And Near Surface Cracks Magnetic Particle Test Equipment
  • Ac Dc Surface And Near Surface Cracks Magnetic Particle Test Equipment
  • Ac Dc Surface And Near Surface Cracks Magnetic Particle Test Equipment
  • Ac Dc Surface And Near Surface Cracks Magnetic Particle Test Equipment
  • Ac Dc Surface And Near Surface Cracks Magnetic Particle Test Equipment
  • Ac Dc Surface And Near Surface Cracks Magnetic Particle Test Equipment
  • Ac Dc Surface And Near Surface Cracks Magnetic Particle Test Equipment
Luogo di origine Pechino
Marca HUATEC
Certificazione ISO, CE, GOST
Numero di modello HCDX-ISC
Quantità di ordine minimo 1pc
Imballaggi particolari Pacchetto standard di esportazione
Tempi di consegna 1-4days
Termini di pagamento T/T, PayPal, Western Union
Capacità di alimentazione 500 pezzi al mese

Contattatemi per campioni e buoni.

WhatsApp:0086 18588475571

WeChat: 0086 18588475571

Skype: sales10@aixton.com

Se avete qualche problema, offriamo assistenza online 24 ore su 24.

x
Dettagli
Fornitore di alimentazione ± 10% 50HZ 5A di CA 220V Uscita CA 38V 10A
Velocità di ispezione ≥6 m/min peso circa 6.5 kg (unità principale)
Nome del prodotto Detettore di difetti di prova di particelle magnetiche portatile Applicazione Utilizzato principalmente per rilevare le crepe superficiali e vicine delle superfici dei pezzi ferr
Forza di sollevamento AC≥5Kg DC≥18Kg (senza articolazioni) Distanza del palo 50-200 mm (regolabile)
Currrent Interconnessione AC e DC Dimensione del regolatore 95x45x75mm (L*W*H)
Dimensioni della custodia 170x140x70mm (L*W*H)
Evidenziare

ac dc magnetic particle test equipment

,

huatec magnetic particle test equipment

,

ac dc ndt magnetic particle testing
Lasciate un messaggio
Descrizione di prodotto

AC And DC Surface And Near Surface Cracks Portable Multifunction Magnetic Particle Test Equipment

 

Introduction:

HCDX-ISC composite magnetic powder flaw detector adopts silicon controlled contactless switch, with low noise, strong magnetic force, long service life and simple operation, suitable for field and laboratory use. The instrument adopts combined configuration, and users can choose probe freely according to their needs. Type A, D, E, O probe can be configured according to user requirements.

 

AC and DC switchable for HCDX-ISC serial portable multifunction magnetic particle flaw detector.

 

HCDX-ISC serial portable multifunction magnetic particle flaw detector adopts 8-bit MCU as the controller (with the phase controlled circuit), In addition, the program of MCU can enjoy lifetime free upgrades, and type A, D, E, O probe can be configured according to user requirements.

 

Application:

Mainly used to detect surface and near surface cracks of ferromagnetic metal parts.

Boiler pressure vessel, steel structure, forgings, castings, welding parts, machined parts, etc.

 

Ac Dc Surface And Near Surface Cracks Magnetic Particle Test Equipment 0

 

The standard probes introduction for model HCDX-ISC:

 

Type D probe (electromagnetic yoke probe): equipped with movable joints, can magnetize and detect the surface workpiece.

Type A probe (horseshoe probe): suitable for all kinds of fillet weld, large workpiece inside and outside corners of local magnetization inspection, equipped with working lights.

 

Technical parameters:

Power supply: AC 220V ± 10% 50HZ 5A

Output: AC 38V 10A

Type A.D.E.O probes are optional and available

Inspection speed: ≥6 m/min

Temperature rise of probe: ≤60℃

Working beat: it is recommended to work for a long period of continuous operation: magnetizing time ≤3 seconds, gap time ≥5 seconds

Weight: about 6.5Kg (main unit)

 

All optional probes parameters:

D type probe

Lifting force: AC≥5Kg DC≥18Kg (no joints)

Pole distance: 50-200mm (adjustable)

Operating current: ≥8A

Working voltage: AC=38V, DC=9V

Weight: 2.5 Kg
Ａtype probe

Lifting force: AC≥ 4.5kg DC≥18Kg

Pole distance: 20-160mm (adjustable)

Working voltage: AC=38V, DC=9V

Weight: 2.0 Kg
Ｏtype probe

Central magnetic intensity: 180Oe

Working voltage: AC=38V

Inside diameter: 150 mm

Weight: 2.5 Kg
Ｅtype probe

Lifting force: ≥12Kg

Distance: 110 mm

Operating current: ≥7A

Inspection speed: 6 m/min

Working voltage: 38 v left, 2

Weight: 3.0 Kg

 

Standard delivery:

 

Host HCDX-ISC 1

Type D yoke probe 1

Type A probe 1

The power line 1

The probe line 1

Standard specimen 1

Operation manual 1

Certificate 1

 

Optional accessories:

Type A probe

O the probe

E probe

D probe

Dead weight

Test specimen

UV light

 

Etichette:

rilevatore di difetti magnetici

mt campione di prova

ac dc magnetic particle test equipment